Servicesound,
31 Turkey Road,
Bexhill-on-Sea,
East Sussex, TN39 5HB.
Tel. 01424 216245
contact@servicesound.com
Home > Gallery > Image 25

Servicesound Gallery
 

The Servicesound Lab/ Workshop

The equipment used is as follows, from left to right on the bench;
iMAC G4 PPC running OS 10.6, two oscilloscopes, top is a Hameg dual trace 20 mHz, bottom is a Telequipment dual trace 5 mHz, next, top is a Ferrograph RTS2 test set and below is the expander for it, next is a Rogers precision AF oscillator, and next to that a Rogers precision RMS meter (both these items were once owned by the late Jim Rogers who lived a mile down the road from me) on top of those are two FLUKE digital RMS meters, next is a Marconi distortion factor meter then a specially built valve driven multi function test system and on the floor in front of the red tool chests (with its huge manual on top) is a computerised Hewlet Packard FFT frequency analyser. Not shown are two AVO Mk9 multimeters and a AVO valve tester. Soldering is by a ANTEX digital soldering system.

Also not shown but here they are anyway are my two Bearded Collied dogs Poppy and Maxie.

The Servicesound Lab/ Workshop
Previous Image
Back to image index
Next Image
Home | About Us | Services | Gallery | Contact Us | Links

© 2008 Servicesound. All rights reserved.
web design by designsfromscratch.co.uk